Call 08046048685 94% Response Rate

Send Enquiry

our range

Isolation Transformer

Keeping in mind the diverse requirements of our customers, we are engaged in manufacturing, supplying, trading and exporting wide range of Isolation Transformer. Our product is highly recommended amongst the customers for their effectiveness. 

Industrial Isolation Transformer

Industrial Isolation Transformer
Get Best Quote
Rs 23,450  / PiecePrice on Request
Input Voltage220-240 V
Output Voltage100-120 V
Operating Temperature0-45 deg C
Rating0.5 KVA
ImpedanceLess than 5 %
An ordinary Industrial Isolated Transformer isolates one circuit from another. Such a transformer is adequate for use with low gain circuits or insensitive instruments. However, if the transformers must work into a high gain load or sensitive instrumentation, noise potentials between the primary circuit and ground must be prevented from affecting the secondary circuits due to capacitive and resistive coupling between the transformers windings.

View Complete details

Yes! I am Interested Request a call back

Isolation Transformer

Isolation Transformer
Get Best Quote
Rs 1,20,000  / PiecePrice on Request

Product Brochure

Input Voltage220-240 V
Output Voltage100-120 V
Rating0.5 KVA
ImpedanceLess than 4 %
Dielectric Strength2.5 KV, 50 Hz for 1 Minute
Operating Temperature0-45 deg C
Isolation Transformer is a transformer used to transfer electrical power from a source of alternating current (AC) power to some equipment or device while isolating the powered device from the power source, usually for safety. Isolation transformers provide galvanic isolation and are used to protect against electric shock, to suppress electrical noise in sensitive devices, or to transfer power between two circuits which must not be connected together.

Suitably designed isolation transformers block interference caused by ground loops. Isolation transformers with electrostatic shields are used for power supplies for sensitive equipment such as computers or laboratory instruments. It is used to transfer signals or power, is isolating, as the primary and secondary are not connected by conductors but only by induction. Isolation is often built with special insulation between primary and secondary, and is tested, specified, and marked to withstand a high voltage between windings, typically in the 1000 to 5000 volt range.

Isolation transformers are commonly designed with careful attention to capacitive coupling between the two windings. The capacitance between primary and secondary windings would also couple AC current from the primary to the secondary. A grounded Faraday shield between the primary and the secondary greatly reduces the coupling of common-mode noise. This may be another winding or a metal strip surrounding a winding.

Features:
  • Optimum output
  • Reliable
  • Durable
  • Arrest Electrical Noise
  • Spike and Surge protection
  • No current Leakage
  • All higher frequencies blocked
  • High insulating materials
  • Lightening and surge protection
  • Short circuit and overload protection

View Complete details

Yes! I am Interested Request a call back

Step Down Isolation Transformer

Step Down Isolation Transformer
Get Best Quote
Rs 29,000  / PiecePrice on Request

Product Brochure

Output Voltage170-200 V
Input Voltage220-240 V
Operating Temperature0-45 deg C
Rating0.5 KVA Onwards
Impedance4 %
Dielectric Strength2.5 KV

Elite Isolation with Step Down Transformers are rugged in design with proven track record for several decades.
Step down – Isolation Transformers are made by high insulating materials and special shielding techniques results in an attenuating common mode and minimizes transverse mode noise. The core and its magnetic properties are to provide sufficient leakage inductance. This will give the greatest attenuation of normal mode power line noise possible, consistent with the transfer of fundamental power frequency, while all higher frequencies are blocked.

Features:

  • Arrest Electrical Noise
  • Spike and Surge protection
  • No current Leakage
  • All higher frequencies blocked
  • High insulating materials
  • Lightening and surge protection
  • Short circuit and overload protection

View Complete details

Yes! I am Interested Request a call back

Step Up Isolation Transformer

Step Up Isolation Transformer
Get Best Quote
Rs 28,000  / PiecePrice on Request

Product Brochure

Output Voltage100-120 V
Input Voltage220-240 V
Operating Temperature0-45 deg C
Dielectric Strength2.5 KV,50 Hz for 1 Minute
ImpedanceLess than 4 %
Rating0.5 KVA

Elite stabilizers are rugged in design and proven track record for several decades.

 Elite Step UP Transformers are rugged and proven for several decades. Step up Isolation Transformers are made by high insulating materials and special shielding techniques results in an attenuating common mode and minimizes transverse mode noise.The core and its magnetic properties are to provide sufficient leakage inductance. This will give the greatest attenuation of normal mode power line noise possible, consistent with the transfer of fundamental power frequency, while all higher frequencies are blocked.


Features:

  • Arrest Electrical Noise
  • Spike and Surge protection
  • No current Leakage
  • All higher frequencies blocked
  • High insulating materials
  • Lightening and surge protection
  • Short circuit and overload protection

View Complete details

Yes! I am Interested Request a call back

Ultra Isolation Transformers

Ultra Isolation Transformers
Get Best Quote
Rs 19,999  / PiecePrice on Request

Product Brochure

Operating Temperature0-45 deg C
Capacity3- 1000 KVA
ImpedanceLess than 4 %
Dielectric Strength2.5 KV, 50 Hz for 1 Minute
Operating Load Power Factor0.75 Lagging to 0.75 Leading
We are leading supplier and manufacturer of Ultra Isolated Transformer one circuit from another. Such a transformer is adequate for use with low gain circuits or insensitive instruments. However, if the transformers must work into a high gain load or sensitive instrumentation, noise potentials between the primary circuit and ground must be prevented from affecting the secondary circuits due to capacitive and resistive coupling between the transformers windings.

Elite stabilizers are rugged in design and proven track record for several decades.

Elite Ultra Isolation transformers are rugged in design with proven track record for several decades.

Ultra Isolation transformer are made with Split winding constructions to reduce the overall capacitance of the winding High insulating materials and special shielding techniques have been used to minimize the noise. The core and its magnetic properties are chosen in a way that displays enough leakage inductance, which in turn offers normal mode power line noise. All the higher frequencies are blocked by the transformer and protect from strong lightening, spike, impulse noise, bus short-circuit, accidental discharge of capacitors, and equipment’s from damage due to electrical noise, spikes etc.

Features:

  • Arrest Electrical Noise
  • Spike and Surge protection
  • No current Leakage
  • All higher frequencies blocked
  • High insulating materials
  • Lightening and surge protection
  • Short circuit and overload protection

View Complete details

Yes! I am Interested Request a call back

Three Phase Isolation Transformers

Three Phase Isolation Transformers
Get Best Quote
Rs 19,899  / PiecePrice on Request

Product Brochure

Input Voltage380-415 V
Output Voltage200-220 V
Operating Temperature0-45 deg C
Rating3-1000 KVA
ImpedanceLess than 4 %
Dielectric Strength2.5 KV, 50 Hz for 1 Minute
Our organization is highly appreciated for manufacturing, supplier a comprehensive range of Isolation - Three Phase Transformers. These transformers are manufactured in compliance with the set industry standards and norms using superior quality raw material and sophisticated technology. Moreover, we offer these Isolation - 3 Phase Transformers in different specifications to meet the variegated requirements of our customers in an efficient manner.

View Complete details

Yes! I am Interested Request a call back

Single Phase Isolation Transformer

Single Phase Isolation Transformer
Get Best Quote
Rs 19,999  / PiecePrice on Request

Product Brochure

Input Voltage220-240 V
Output Voltage100-120 V
Operating Temperature0-45 deg C
Dielectric Strength2.5 KV, 50 Hz for 1 Minute
ImpedanceLess than 4 %
Rating0.5 KVA

We hold expertise in manufacturing, supplying and exporting a wide range of Single and Three Phase Isolation Transformer ( 3 kVA - 500 kVA ). The transformers offered by us are manufactured step up & step down mechanism using optimum quality components and latest technology. These are widely used for C.N.C. machines and other various machines control. Moreover, to offer a superior quality range of products to our clients, we test these stabilizers on various predetermined parameters before the final delivery.

View Complete details

Yes! I am Interested Request a call back

Three Phase Isolation Transformer

Three Phase Isolation Transformer
Get Best Quote
Rs 29,999  / PiecePrice on Request
PhaseThree Phase
BrandElite Power Systems
EfficiencyLess Than 98%
Operating Temperature0 - 45 Deg C
Capacity Ranges3 KVA to 1000 KVA
Input Voltage Range340 V - 460 V
Input Frequency47 to 53 Hz

Isolation Three Phase Transformers the input supply is completely isolated from the output, by means of an isolation transformer.


Ferraro Resonant Technology:

  • No moving parts
  • Overload protection
  • short circuit protection
  • Spike rejection capabilities
  • Floating output
  • No semi-conductors used (normal CVT)
  • No electronics circuits (normal CVT)
  • Faster voltage correction than servo stabilizer


Applications:

  • The CVT's are used for various applications like computers, data processing equipment, audio/video equipment, photo processing equipment, bio-medical equipment, telex, EPABX, fax, cash registers, electronic typewriters, internet application, modem & other accessories like a net phone, control panels, etc.

View Complete details

Yes! I am Interested Request a call back

Single Phase Isolation Transformer

Single Phase Isolation Transformer
Get Best Quote
Rs 26,666  / PiecePrice on Request
BrandElite Power Systems
Capacity1 KVA - 20 KVA
Output Voltage220 V - 230 V - 1 %
PhaseSingle Phase
Operating Temperature0 - 45 deg C
Input Voltage Range170 - 270 V
Input Frequency47 to 53 Hz

Constant voltage Single Phase Transformer in Chennai, Tamil Nadu,. uses a tank circuit composed of a high-voltage resonant winding and a capacitor to produce a nearly constant average output with a varying input. The ferromagnetic approach is attractive due to its lack of active components, relying on the square loop saturation characteristics of the tank circuit to absorb variations in average input voltage. Older designs of ferromagnetic transformers had an output with high harmonic content, leading to a distorted output waveform. Modern devices are used to construct a perfect sine wave. The ferromagnetic action is a flux limiter rather than a voltage regulator, but with a fixed supply frequency it can maintain an almost constant average output voltage even as the input voltage varies widely.


Salient Features:

  • Isolation transformer: the input supply is completely isolated from the output, by means of an isolation transformer.

 

Ferraro Resonant Technology:

  • No moving parts
  • Overload protection
  • Short circuit protection
  • Spike rejection capabilities
  • Floating output
  • No semiconductors used (normal CVT)
  • No electronics circuits (normal CVT)
  • Faster voltage correction than servo stabilizer

 

Applications:

  • The CVT's are used for various applications like computers, data processing equipment, audio/video equipment, photo processing equipment, bio-medical equipment, telex, EPABX, fax, cash registers, electronic typewriters, internet application, modem & other accessories like netphone, control panels, etc.

View Complete details

Yes! I am Interested Request a call back

EXPLORE MORE CATEGORIES